SPD Flash Tool

SPD Flash Tool Is A Small Software That is specially Designed for SPD Smartphones, this is A free tool that helps to install software On All types of SPD Devices,

so let’s go we tell you some information about this tool and how to use the tool

Tool Information

Tool NameSPD Flash Tool / Unisoc
Supported FileOnly PAC File
FixHang On Logo And Other Software Problems
UnlockUnlock the Phone Screen Lock
Flash All AndroidNo, The Tool Support Only Speadrum Device
Flash all SPD phonespreadtrum chipset Phone Supported

SPD Flash Tool Download

How To Flash Spreadtrum Phone With This Tool

SPD Tool Use Is Very Simple And Easy, There a Are few things you need to know before Using this tool

SPD Flash Tool

  1. A Window Computer
  2. Download Latest SPD USB Drivers
  3. A USB DATA Cable
  4. A correct Model Firmware Download
  5. Winrar Or 7zip Software Download
  6. Phone Battery Charged up to 25%
  7. Knowing the phone’s boot key is essential

How To Flash Firmware With SPD/ Unisoc Flash Tool

  • First Of All Install Zip Software
  • Unpack Firmware in A Folder
  • Remove SPD Drivers From Zip And Install USB Drivers

Now Unpack Unisoc Flash Tool And Run Tool Exe, Go To the File Button Select PAC File, And Load the File On Flash Tool Wait For the Complete Loading File, then Turn Off the Phone And

press the boot key and connect the cable mobile to the computer If the flashing process doesn’t start after connecting the phone to the computer, check these things

  1. make sure the cable you are using is a data cable and a correct cable
  2. check that the drivers you are using are new and installed properly
  3. make sure your phone’s battery is charged, if not, charge it
  4. check the boot key you are pressing is the correct boot key, if not, press the correct boot key
How to Find SPD Keypad Phone Bootkey?

find every phone Bootkey is a difficult process due to the increasing number of SPD Phones, some people USA a boot cable for the boot key. this cable is made manually by shorting the GND point to the adjacent Point, but here we will share with you how to find the boot key without the cable, you have to turn off the phone, and then press all buttons together except the power button and connect the cable to the PC, this way your phone will go into boot mode now you can unlock or flash your phone

FAQs

  1. Is SPD Flash Tool free to use for all versions?

Yes, the SPD Flash Tool is Free

2. Can I use the SPD Flash Tool on non-Android devices?

yes Some Android phones flash with this tool

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top